When we make tungsten carbide circular knives (cemented carbide circular knives), the raw material proportions are mainly based on powder metallurgy processes.
I. Tungsten carbide powder
Tungsten carbide powder accounts for 70%-97% of the total weight, while binders (such as cobalt or nickel) account for 3%-30%. Specific steps include mixing WC particles with Co powder according to grade ratios, pressing and forming, sintering, etc. Common proportions include:
YG6 (94% WC, 6% Co): Used for general cutting, balancing hardness and toughness.
YG8 (92% WC, 8% Co): Slightly stronger toughness, suitable for medium loads.
YG12 (88% WC, 12% Co): Higher toughness, suitable for high-impact occasions.
If it is a tool for cutting corrugated paper, to ensure wear resistance and cutting accuracy, the hardness requirement is usually HRA 89-93 (Rockwell hardness A scale), corresponding to a higher proportion of tungsten carbide in the composition (such as 90%-95% WC, 5%-10% Co), to provide sufficient hardness and wear resistance while avoiding excessive brittleness. Low cobalt content can increase hardness, but it needs to be adjusted according to paper thickness, machine speed, etc.; for example, the YG6X grade (fine-grained WC, 6% Co) is commonly used in such applications, with hardness approximately HRA 91-92. If the hardness is insufficient, it may lead to rapid blunting of the blade; conversely, if too high, it is prone to breakage.
2. Sintering Deformation and Dimensional Instability
For example, a 27-gram tungsten carbide tool (usually referring to cemented carbide tools), the proportion of tungsten carbide (WC) in its composition varies depending on the specific grade, but the typical range is 70%-97%, with the remaining part mainly cobalt (Co) or other metal binders (such as nickel). Taking common grades as examples, if it is WC-Co 12 (88% WC, 12% Co), then in a 27-gram tool, there are approximately 23.76 grams of tungsten carbide. If a higher WC content grade is used (such as 94% WC, 6% Co), then approximately 25.38 grams. Pure tungsten carbide tools are rare because they are too brittle and usually require the addition of binders to improve toughness.
So, how should we make it If we are selecting the composition for a tungsten carbide circular knife used to cut corrugated paper, a balance must be in consideration between:
High Hardness and Wear Resistance: Sand, dust, silicates, and other impurities present in corrugated paper cause rapid wear to the cutting edge. Therefore, a higher tungsten carbide content (typically over 85%) is required to maintain sharpness and service life.
Toughness: The impacts during cutting and the unevenness of the paper demand a certain level of toughness in the knife to prevent chipping. This means the cobalt content should not be too low, with a common balance point around 6%–10%.
A typical hard alloy formulation for cutting corrugated paper likely approximates the YG series (tungsten-cobalt type), with a tungsten carbide content ranging from 85% to 90% and a cobalt content between 10% and 15%. Trace amounts of chromium carbide may also be added to further refine the grain structure and enhance wear resistance.
About Huaxin:Tungsten Carbide Cemented Slitting Knives Manufacturer
CHENGDU HUAXIN CEMENTED CARBIDE CO.,LTD are a professional supplier and manufacturer of tungsten carbide products, such as carbide insert knives for woodworking,carbide circular knives for tobacco&cigarette filter rods slitting,round knives for corugatted cardboard slitting ,three hole razor blades/slotted blades for packaging ,tape,thin film cutting,fiber cutter blades for textile industry etc.
With over 25 years development, our products have been exported to U. S. A, Russia, South America,India,Turkey,Pakistan,Australia,Southeast Asia etc. With excellent quality and competitive prices, Our hard working attitude and responsiveness are approved by our customers. And we would like to establish new business relationships with new customers.
Contact us today and you will enjoy benefits of good quality and services from our products!
The high performance tungsten carbide industrial blades products
Custom Service
Huaxin Cemented Carbide manufactures custom tungsten carbide blades, altered standard and standard blanks and preforms, starting from powder through finished ground blanks. Our comprehensive selection of grades and our manufacturing process consistently delivers high-performance, reliable near-net shaped tools that address specialized customer application challenges across diverse industries.
Tailored Solutions for Every Industry
custom-engineered blades
Leading manufacturer of industrial blades
Follow us: to get Huaxin's industrial blades products releases
Customer common questions and Huaxin answers
That depends on the quantity, generally 5-14days. As an industrial blades manufacturer, Huaxin Cement Carbide plans the production by orders and customers' requests.
Usually 3-6 weeks, if you request customized machine knives or industrial blades that are not in stock at the time of purchasing. Find Sollex Purchase & Delivery Conditions here.
if you request customized machine knives or industrial blades that are not in stock at the time of purchasing. Find Sollex Purchase & Delivery Conditions here.
Usually T/T, Western Union...deposits firstm, All first orders from new customers are prepaid. Further orders can be paid by invoice...contact us to know more
Yes, contact us, Industrial knives are available in a variety of forms, including top dished, bottom circular knives, serrated / toothed knives, circular perforating knives, straight knives, guillotine knives, pointed tip knives, rectangular razor blades, and trapezoidal blades.
To help you get the best blade, Huaxin Cement Carbide may give you several sample blades to test in production. For cutting and converting flexible materials like plastic film, foil, vinyl, paper, and others, we provide converting blades including slotted slitter blades and razor blades with three slots. Send us a query if you're interested in machine blades, and we'll provide you with an offer. Samples for custom-made knives are not available but you are most welcome to order the minimum order quantity.
There are many ways that will prolong the longevity and shelf life of your industrial knives and blades in stock. contact us to know about how proper packaging of machine knives, storage conditions, humidity and air temperature, and additional coatings will protect your knives and maintain their cutting performance.
Post time: Dec-15-2025
